Connecting Your SH100 MyWiFi Hotspot

Connecting your pre-configured hotspot is easy!  

Just follow these steps:

  1. Connect with ethernet cable the Blue WAN port in the back of the MyWiFi Hotspot to the Internet  (Modem, Switch, Router)
  2. Plug in the Power adapter into a standard outlet (avoid using an extension cord)

  3. The lights should start flashing as the device calibrates.  Wait 5 minutes for the device to sync and show as Green
  4. This is what your device should look like in the dashboard
If after 10 mins your device is not showing as Online in the Devices section, try resetting the power on your device (unplug).  
If after another 10 minutes your device is not showing as Online in the Devices section,  please visit the Troubleshooting Guide.
If you have any questions about this, please contact our support team by clicking the support icon in the bottom right-hand corner of this page.


Did this answer your question?