How to Tether an iPhone or Android To A Mini Demo Device

The following works on the GLI GL-AR150 and Nexx WT-3020F mini devices.

Here’s what you will need:

  • 1 x USB Plug 
  • 1 x Battery / Power Pack
  • 1 x Internet Source (Smartphone w/USB adapter or 4G USB Stick)

There are 3 methods to use when using your Mini Demo device: 

Tethering iPhone/Android phone, 4G USB Stick or Wired LAN

Method 1: Tethering iPhone/Android
  1. Plug the Mini Demo device into the power adapter
  2. Turn Wi-Fi off on your phone (optional)
  3. Go to ‘Settings’
  4. Select ‘Personal Hotspot’
  5. Select ‘Connect with USB’
  6. Connect your USB phone charger to the charging port on your phone
  7. Connect the USB end to the USB port on the Mini Demo device
  8. Your smartphone will recognize the device
  9. Select 'Trust Device' when prompted
  10. Wait for bar to turn blue (on iPhone)
  11. You're now connected!

NOTE: If your phone is not tethering the first time, leave everything plugged in and disable/enable the Hotspot on your mobile phone. It should then recalibrate.

Method 2: 4G USB Stick
  1. Plug your USB Micro Plug into the Mini.
  2. Take the USB end of the Micro Plug and insert into the USB of your battery pack
  3. Plug 4G stick into Mini Device USB port to provide an internet source to the device.
  4. You're now connected!

Method 3: Wired LAN
  1. Plug your USB Micro Plug into the Mini.
  2. Take the USB end of the Micro Plug and insert into the USB of your battery pack
  3. Plug in a LAN Internet connection into the WAN port of the device
  4. You're now connected!



Did this answer your question?